How to Choose a New Electrical Breaker Panel For Your Home

3210Holton (3)

But first, what is an electrical breaker panel?

The electrical breaker panel is a large metal box attached to the outside of your home near your electric utility meter.  It acts as the main component for the flow of electricity supplied to your home from the utility company, and every home with utility-supplied electricity has some form of one.

How it works:

As the electricity is fed to your house from the utility company, it passes through the meter, through the supply system, then through your breaker box. As the electric lines enter the box, they are then broken into subsidiary circuits that are connected to fuses. The fuses help to protect your home from overloads.

If you constantly have to flip breakers or replace fuses due to overload, first make sure to check that the breakers or fuses themselves haven’t failed (it does happen sometimes).  If it is a continual problem after repair and/or troubleshooting, your overall usage may be pulling too much load and you may have to upgrade your panel.

Choosing the right breaker panel:

Not all breaker panels are created equal. Depending on the size of your home, the amount of electricity you need per room, the number of large appliances you will be running, and any additions you may add on in the future, picking the right replacement is important.

Factors to consider:

Amperage – Determine the amperage capacity of your home. Consider this: A home with 200-amp (ampere) capacity can run multiple large appliances at the same time with no problem; whereas 100 amps or less would just barely enable you to run a hot water heater, a stove, and a hair dryer at once.  Most homes these days are built with a 125-amp minimum, depending on square footage and other factors.

Breakers – You will need to know how many circuit breakers you will require in your new panel. Base it simply on your needs. Keep in mind that a circuit breaker is designed to bear only 80% of its rated capacity (ex. A 20-amp breaker is rated to bear a 16-amp load before kicking); this is a standard safety feature to prevent potential overloads. Locate the loads for each device/appliance (usually somewhere on the device itself or in the manual), and if amps are not stated, use this math formula to help you determine what you need:

Amps = Watts ÷ Volts.

Brand – Older homes built between the 1950’s-70’s sometimes have Federal Pacific Electric, Zinsco, Bryant or Westinghouse brand panels; these brands have been discontinued and are no longer installed due to various reliability and safety issues.  If you have one of these brands and you need a replacement, it will be replaced with General Electric, Eaton, or Square-D brand.

Procedure – Replacing or upgrading a panel takes approximately a half-day, and must be coordinated with the utility company and the city.  This type of job requires an electrical building permit and must have an inspection.  The power to your home will be shut off early in the morning by your utility company, and we will do the installation.  Please prepare for about ½-day to a full day with no electrical power.  Once complete, the city inspector checks the installation to ensure it is to code and the utility company turns your power back on.

For Austin residents: Please note that due to changing ordinances with the City of Austin and Austin Energy, additional fees may be assessed by the utility company for reconnecting the power.  We will do our best to keep you informed of such changes as we receive them.

Need help determining which electrical breaker panel suits your home, and how to install it properly? Contact us by phone (512) 554-6789 or email to find out how we can help you.

 

7 Things to Consider Before Hiring a Quality Commercial Electrician

If you run a business or own a commercial property, you know how important it is to hire high-quality professionals who get the job done right the first time. This is the same for any type of business or commercial property, whether it’s dealing with plumbing, IT, or wiring and electricity

Continue reading » 7 Things to Consider Before Hiring a Quality Commercial Electrician

The Benefits of Hiring a Professional Electrician for Your Austin Home

The typical home in Texas has wiring that stretches from top to bottom. We have grown to rely on electricity for almost every need imaginable. From cooking to entertainment to lighting our way at night, electricity makes almost every modern day amenity possible.

But what happens when all that which makes your home work suddenly fails? You call an electrician to get the job done right.

Here are the benefits of hiring an electrician for your Austin home.

Continue reading » The Benefits of Hiring a Professional Electrician for Your Austin Home

Many Central Texas Homes Don’t Meet Minimum Electrical Code Standards

nec

The National Electric Code is a group of standards established by the National Fire Protection Association regarding safe electrical installation, wiring, and equipment in homes, commercial buildings, and other areas. The code, which is updated every three years, was developed to prevent electrical fires, electrical shocks, and other unsafe issues. The code is more than a restrictive document, however – it is also an instructive one.

Continue reading » Many Central Texas Homes Don’t Meet Minimum Electrical Code Standards

Electrical Safety in Austin TX

nationalelectricitymonth
May is National Electrical Safety Month. To mark this occasion, we’re providing our readers with a checklist of ideas you can use to help protect your family and property. Whether you reside here in the Austin TX area or somewhere else, these ideas can help you.  Electricity continues to be a safe and reliable form of energy that we use virtually every minute of every to make our lives easier. But it’s easy for us to take electricity for granted, and overlook the fact that it can be dangerous in not used properly. Be sure to check out the blog for another great article, Our Safety Inspections: A Point-By-Point Explanation. Here are some things you can do to better ensure a high level of electrical safety in your home:

Continue reading » Electrical Safety in Austin TX

Our Safety Inspections: A Point-by-Point Explanation

We offer complimentary safety inspections with every service call.  They are done after your service is complete, taking approximately 15 minutes, and for no additional charge.  The points on the inspection are based on the current guidelines in the National Electrical Code, as well as common-sense pointers from our master electricians (with close to 70 years combined experience).

Safety is our top concern when servicing your home.  As codes and local ordinances change, we will help you keep updated on what the requirements are to ensure you are up-to-date.

Continue reading » Our Safety Inspections: A Point-by-Point Explanation